Excavator weight range
– Dipper mounted (T): 25.0 – 40.0
Excavator weight range
– Boom mounted (T): 15.0 – 22.0
Self weight excluding saddle (Kg): 2900
Jaw opening (mm): 626
Closing Force (T): 716
Cycle time (seconds): 4.5 / 5.0
This 4TÉ CapStone FDS-4001 Dedicated Shear is available for sale or hire to suit excavators from 25T – 40T (dipper mounted) or 15T – 22T (boom mounted). With 10+ years of product development behind this shear, it has become a shear not to go unnoticed in the world of scrap and demolition.
Meticulously engineered, with the benefit of years of experience and testing, using unique engineering technologies, its superior strength is evident as it conquers its tasks with thrilling ability.
Being made in Germany is also an attribute to its culture of innovation and performance excellence.
IMPROVEMENT OF CUTTING FORCES
Such intricate care and attention to detail has been expended that even the geometry of the construction has been carefully calculated. The cutting force is optimized by creating maximum leverage power at the point where the most force is required. The point where the most force is required for cutting metal is hugely different to that point when crushing concrete.
This is why a shear and a pulveriser cannot be incorporated into the same attachment and achieve optimum performance in both.
LONG LASTING PRODUCT
Our products are not just designed to perform brilliantly, but are
also built to last.
Wear parts made of highly wear resistant casting.
Special wide pivot bearing to reduce flex between jaws.
Inverted ram to reduce vulnerability of chrome.
Harder rod chrome.
Better designed locking mechanism for wear parts.
Ram rod and eye are one piece for strength.
This 4TÉ CapStone FDS-4001 Dedicated Shear is available for sale or hire to suit excavators from 25T – 40T (dipper mounted) or 15T – 22T (boom mounted). With 10+ years of product development behind this shear, it has become a shear not to go unnoticed in the world of scrap and demolition.
Meticulously engineered, with the benefit of years of experience and testing, using unique engineering technologies, its superior strength is evident as it conquers its tasks with thrilling ability.
Being made in Germany is also an attribute to its culture of innovation and performance excellence.
IMPROVEMENT OF CUTTING FORCES
Such intricate care and attention to detail has been expended that even the geometry of the construction has been carefully calculated. The cutting force is optimized by creating maximum leverage power at the point where the most force is required. The point where the most force is required for cutting metal is hugely different to that point when crushing concrete.
This is why a shear and a pulveriser cannot be incorporated into the same attachment and achieve optimum performance in both.
LONG LASTING PRODUCT
Our products are not just designed to perform brilliantly, but are
also built to last.
Wear parts made of highly wear resistant casting.
Special wide pivot bearing to reduce flex between jaws.
Inverted ram to reduce vulnerability of chrome.
Harder rod chrome.
Better designed locking mechanism for wear parts.
Ram rod and eye are one piece for strength.
Excavator weight range - dipper mounted (T) | 25.0 - 40.0 |
Excavator weight range - boom mounted (T) | 15.0 - 22.0 |
Self weight excl. saddle (Kg) | 2900 |
A - Jaw opening (mm) | 626 |
C - Overall height (mm) | 2955 |
D - Jaw depth (mm) | 590 |
E - Overall width (mm) | 755 |
F - Overall height (mm) | 1180 |
Cutting length (mm) | 590 |
Closing force at point 'G' (kN) | 7022 |
Closing force at point 'G' (T) | 716 |
Cycle time (seconds) | 4.5 / 5.0 |
Open/close max pressure (bar) | 380 |
Rotation max pressure (L/min) | 100 -110 |
Rotation flow (L/min) | 25 |
Open/close flow (L/min) | 200 - 250 |
● Profile (mm) | 75 |
◯ Profile (mm) | 260 |
⫎ Profile (mm) | 340 |
⨿ Profile (mm) | 250 |
− Profile (mm) | 16 |
Click the button below.
Dedicated Shears Specification Sheet